weiter zur Liste zurück pdf print Heavy duty connector C 146 A

	250 V, 10 A
	250 V, 14 A
	600 V, 10 A 16 A 20 A
In general approvals refer to representative versions of the connector. Extent and specification of tests upon request

Connectors C 146 A Male insert No. of contacts 16 + PE, 250 V, Termination: screw, Contact plating: silver plated
Part No.	C146 10A016 002 4
Series	Heavy duty connectors C 146
Subseries	Heavy duty connector C 146 A
Common Characteristics
No. of contacts		16 + PE
Weight male insert		68 g
Weight female insert		73 g
Electrical Characteristics
Rated voltage	DIN EN 60664-1 / IEC 60664-1	250V
Rated impulse voltage	DIN EN 60664-1 / IEC 60664-1	4000V
Rated current at 40°C		14 A
Voltage proof	DIN EN 60512-2, Test 4a / IEC 60512-2, Test 4a	2.800 V
Installation category	DIN EN 60664-1 / IEC 60664-1	III
Insulation group	DIN EN 60664-1 / IEC 60664-1	III b
Insulation resistance	DIN EN 60512-2, Test 3a / IEC 60512-2, Test 3a	≥ 1012  Ω
Contact resistance	DIN EN 60512-2, Test 2a / IEC 60512-2 Test 2a	≤ 5 mΩ
Current carrying capacity	DIN EN 60512-3, Test 5b / IEC 60512-2 Test 5b	see derating curves
Pollution degree	DIN EN 60664-1 / IEC 60664-1	3
Climatical Characteristics
Climatic category	DIN EN 60068-1 / IEC 60068-1	40 / 100 / 21
Upper temperature		+ 100 °C / 1000 h
Lower temperatur		- 40 °C / 16 h
Mechanical Characteristics
IP degree of protection	DIN EN 60529 / IEC 60529	IP20 mated
Mechanical lifetime	IEC 60512-5; Test 9 a	≥ 500 mating cycles
Materials
Contacts		CuZn
Insert		PBT
Contact plating		silver plated
Further Characteristics
Termination		screw
Wire gauge		0,25 - 2,5 mm²